Blog

NANO ANTI ICE is an advanced technology chemical compound that stands out with its anti-freezing and anti-corrosion properties in cooling and heating systems. Introduced to the Turkish market by Kuvars Kimya, this product provides long-lasting, safe and energy efficient operation of systems such as chiller groups, heat exchangers and cooling groups.

Anti-Freeze and Corrosion Protective Properties

NANO ANTI ICE, thanks to the special chemicals in its content:

It can adjust the freezing point between -20°C and -45°C according to the need.
It provides an anti-icing effect in the systems where it is used.
Extends system life by continuously protecting metal surfaces against corrosion.
Does not damage sensitive elements such as plastics, gaskets and o-rings.

The mixture does not decompose even when the freezing point approaches and does not cause problems such as expansion, bursting or cracking in piping systems. Thus, both the physical integrity of the system is preserved and energy efficiency is increased.

Energy Efficiency and Savings

NANO ANTI ICE has a special formula that can reach higher temperatures with less energy compared to water. This feature reduces the energy consumption of the systems and minimizes operating costs. It also prevents the formation of scale, sludge and algae by reducing oxygen passage through the system. This greatly reduces sensor failures and other maintenance costs.

Use in Chillers and Chillers

It is extremely important to avoid antifreeze and similar corrosive chemicals in closed loop systems. NANO ANTI ICE offers an environmentally friendly alternative to traditional products such as antifrogen. It gives effective results in many different systems such as chiller groups, boilers, pipes and honeycombs.

Corrosion and Petrification Inhibitors

NANO ANTI ICE, inside the system:

Prevents corrosion formation,
Prevents Ca, Mg and Silica petrification,
It provides long-term protection by forming a thin protective film layer on surfaces.

With these features, it increases the overall life of the system and eliminates expensive maintenance and repair costs.

Water Mixture and Application Areas

NANO ANTI ICE can be mixed with water in any ratio, but it is recommended to use with pure water for the most effective result. It can be applied in areas such as chiller groups, cooling groups, solar energy systems, boilers and heat exchangers.

Result

Making a difference with its anti-freezing, anti-corrosion and anti-icing effects in your cooling and heating systems, NANO ANTI ICE saves energy and extends the life of your system. If you are looking for a reliable solution in closed circuit systems, you can reach maximum performance with NANO ANTI ICE.